Q10N 10x Optical Zoom Single Sensor Gimbal Camera Specification
Q10N 10x Optical Zoom Single Sensor Gimbal Camera Specification
| Hardware Parameter | |
| Working voltage | 16V |
| Input voltage | 4S ~ 6S (16V - 24V) |
| Output voltage | 5V (connect with PWM) |
| Dynamic current | 150~700mA @ 16V |
| Working environment temp. | -20℃ ~ +60℃ |
| Output | IP (RTSP 720p/1080P 25fps) |
| Local-storage | SD card (Up to 256G,class 10, FAT32) |
| Photo storage format | JPG(1920*1080/1280*720) |
| Video storage format | MP4 (1080P 25fps) |
| Card reading online | HTTP read pictures |
| Control method | PWM / TTL / S.BUS / TCP/UDP(IP output version) |
| Geotagging | Not support |
| Gimbal Spec | |
| Mechanical Range | Pitch/Tilt: ±105°, Roll: ±70°, Yaw/Pan: ±360°*N (IP output version) |
| Controllable Range | Pitch/Tilt: -45°～90°, Yaw/Pan: ±360°*N (IP output version) |
| Vibration angle | Pitch/Roll: ±0.02°, Yaw：±0.02° |
| One-key to center | √ |
| Camera Spec | |
| Imager Sensor | 1/2.8" CMOS Sensor |
| Total pixel | 2.48M |
| Picture quality | Full HD 1080 (1920*1080) |
| Optical zoom | 10x, f = 4.9mm ~ 49mm |
| Digital zoom | No |
| Angle of View (Horizontal) | 53.2°(Wide end) ~ 5.65° (Tele end) |
| Sync system | PAL/NTSC; Progressive Scan |
| S/N ratio | more than 50dB |
| Min illumination | Color : 0.002 lux@F1.2 BW: 0.001lux@F1.2 |
| Day&Night Mode Switch | ICR filter type |
| White balance | Auto / One Push / Manual / Indoor / Outdoor |
| Shutter speed | Auto / Manual (1/5 ~ 1/50,000 sec) |
| Focus | Auto / One Push / Manual |
| Packing Information | |
| N.W. | 506g / 560g (Viewport version) |
| Product meas. | 91.6*111.4*143.1mm (including control box) / 91.6*111.4*148.8mm(Viewport Version) |
| Accessories | 1pc gimbal camera device, screws, USB to TTL cable / Hight quality box with foam cushion |
| G.W. | 860g |
| Package meas. | 200*200*150mm |
For more details, please visit Q10N 10x Optical Zoom Gimbal Camera