Product Introduction
Specification
VR80A Industrial Wireless 4G LTE Router Specification
Hardware Specifications | ||
Cellular Interface |
Antenna | 1 x SMA-K Note: North America models: 2 x SMA 4G antenna connectors. |
SIM card | 1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots | |
Ethernet | 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection | |
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection |
||
Indicators | LED | PWR: always on after powered on WLAN: always solid on when WiFi is enabled and working properly WAN: solid when cable is connected, blinking when data is transmitting and receiving LAN : solid when cable is connected, blinking when data is transmitting and receiving 2/3/4G mode indicator:2G led is on after connected to 2G network 3G led is on after connected to 3G network Both leds is on after connected to 4G network Signal strength:4 solid bars,strongest signal |
WiFi Interface | Standards & Frequency | IEEE 802.11b/g/n,2.4GHz, AP mode |
Data speed | IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps | |
Antenna | 1 x SMA-K | |
Transmission distance | 80 meters by line of sight.Actual transmission distance depends on environment of the site. | |
Power Supply | Adaptor | DC 12V/1A |
Connector | DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or 2 PIN industrial terminal block,reverse polarity protection | |
Input voltage | DC 9~36V | |
Working power | Average 175mA/12V | |
Physical Characteristics |
Housing | Metal shell,IP30 |
Dimensions | 110.0*94.0*29.0 mm(L*W*H) | |
Installation method | Panel mounting, DIN-Rail mounting | |
EMC | Static IEC61000-4-2, level 2 Pulsed Electric Field IEC61000-4-4, level 2 Surge IEC61000-4-5, level 2 |
|
Operating temperature | -20℃~+70℃ | |
Storage temperature | -40℃~+125℃ | |
Operating humidity | 5%~95%RH(non-condensing) | |
Others | Reload | Pinhole reset button |
TBD | Debug interface (TTL Level) | |
Embedded Watchdog | Device runs self-detection, auto recovers from malfunctions | |
Certificate | CE,CCC,FCC,ANATEL,PTCRB,AT&T | |
Software Specifications | ||
Network Connection |
WAN protocol | PPP, PPPoE, DHCP client |
LAN protocol | ARP, DHCP server, NAT | |
4G network access | Auto APN/VPDN, private network Access authentication: CHAP/PAP |
|
WLAN security | Open system,WPA/WPA2 PSK TKIP/AES encryption |
|
IP routing | Static routing | |
Network diagnosis | Ping,route trace,DNS | |
Device management |
Configuration | Web |
Remote management | Telnet, SSH, AT command,SNMP | |
PUSR platform | Remote monitoring,remote upgrade,alarming,base station location,remote access to web pages of the router |
|
Security | Failover backup | Failover between 4G and WAN, ensures automatic switch to alternative backup connection |
Firewall | DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control | |
VPN | Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols | |
Service | DDNS | Remote access the device through domain name |
Alarm | Email,SMS | |
Others | NTP client Timing task |
|
Model | VR80 A | |
Region | Region North America(AT&T) | |
Frequency | FDD-LTE | B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 |
WCDMA | B1/B2/B4/B5/B6/B8/B19 |
For more details, please visit VR80A Industrial Wireless 4G LTE Router
-
Product Introduction
-
Specification
VR80A Industrial Wireless 4G LTE Router Specification
Hardware Specifications | ||
Cellular Interface |
Antenna | 1 x SMA-K Note: North America models: 2 x SMA 4G antenna connectors. |
SIM card | 1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots | |
Ethernet | 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection | |
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection |
||
Indicators | LED | PWR: always on after powered on WLAN: always solid on when WiFi is enabled and working properly WAN: solid when cable is connected, blinking when data is transmitting and receiving LAN : solid when cable is connected, blinking when data is transmitting and receiving 2/3/4G mode indicator:2G led is on after connected to 2G network 3G led is on after connected to 3G network Both leds is on after connected to 4G network Signal strength:4 solid bars,strongest signal |
WiFi Interface | Standards & Frequency | IEEE 802.11b/g/n,2.4GHz, AP mode |
Data speed | IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps | |
Antenna | 1 x SMA-K | |
Transmission distance | 80 meters by line of sight.Actual transmission distance depends on environment of the site. | |
Power Supply | Adaptor | DC 12V/1A |
Connector | DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or 2 PIN industrial terminal block,reverse polarity protection | |
Input voltage | DC 9~36V | |
Working power | Average 175mA/12V | |
Physical Characteristics |
Housing | Metal shell,IP30 |
Dimensions | 110.0*94.0*29.0 mm(L*W*H) | |
Installation method | Panel mounting, DIN-Rail mounting | |
EMC | Static IEC61000-4-2, level 2 Pulsed Electric Field IEC61000-4-4, level 2 Surge IEC61000-4-5, level 2 |
|
Operating temperature | -20℃~+70℃ | |
Storage temperature | -40℃~+125℃ | |
Operating humidity | 5%~95%RH(non-condensing) | |
Others | Reload | Pinhole reset button |
TBD | Debug interface (TTL Level) | |
Embedded Watchdog | Device runs self-detection, auto recovers from malfunctions | |
Certificate | CE,CCC,FCC,ANATEL,PTCRB,AT&T | |
Software Specifications | ||
Network Connection |
WAN protocol | PPP, PPPoE, DHCP client |
LAN protocol | ARP, DHCP server, NAT | |
4G network access | Auto APN/VPDN, private network Access authentication: CHAP/PAP |
|
WLAN security | Open system,WPA/WPA2 PSK TKIP/AES encryption |
|
IP routing | Static routing | |
Network diagnosis | Ping,route trace,DNS | |
Device management |
Configuration | Web |
Remote management | Telnet, SSH, AT command,SNMP | |
PUSR platform | Remote monitoring,remote upgrade,alarming,base station location,remote access to web pages of the router |
|
Security | Failover backup | Failover between 4G and WAN, ensures automatic switch to alternative backup connection |
Firewall | DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control | |
VPN | Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols | |
Service | DDNS | Remote access the device through domain name |
Alarm | Email,SMS | |
Others | NTP client Timing task |
|
Model | VR80 A | |
Region | Region North America(AT&T) | |
Frequency | FDD-LTE | B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 |
WCDMA | B1/B2/B4/B5/B6/B8/B19 |
For more details, please visit VR80A Industrial Wireless 4G LTE Router